Lowrider XL 0004
Differing slightly from our standard Lowrider, the Lowrider XL series is designed to be used with actions that are larger than 1.470″. This is the stock for anyone using the larger diameter actions from makers like BAT Machine, Borden, or Kelbly. The Lowrider XL features a beefed up tang area and a pistol grip that is much more vertical to allow for this added tang material. Outside of these two changes, the Lowrider XL 0004 is very much like its little brother.
Lowrider XL series of stocks feature 3 inch forearms and are typically set at 13-1/2 inch length of pull. This length of pull can be reduced to roughly 12 inches or extended to as much as 15-1/2 if the shooter uses adjustable butt hardware. For the butt pad the Lowrider XL 0004 is ready to accept any pad from any manufacturer. It will just need to be ground to fit the 5″ butt stock for precise fit. As with all Lowrider stocks the Lowrider XL is engineer for straight and true tracking in the bags with near zero torque if inletted and bedded properly by a competent gunsmith.
Lowrider XL 0004 is a Panda Short Action (SA) Inletted stock , roughly 95% finish sanded, made of Black Walnut with Wenge stringers and center lamination. Lowrider XL 0004 will require bedding, fit and finish by a your gunsmith of your choice. The toe of this stock features a bag hook cut out with 3/4″ parallel bag riding groove. The bag rider groove does step up to over 3/4 inches which makes it a very nice choice for shooters using a tapered rear bag.
As for a barrel inlet – we cut a 1.350″ barrel channel in Lowrider XL 0002 to aid in cooling for competition shooters or anyone else sending a large volley of bullets down range in short periods of time.